Skip to main content
IT KORR
IT KORRKeeping Organizations Reliable & Resilient

Business Continuity & Disaster Recovery · Resource

Disaster Recovery Plan Template

A technical DR plan document structure covering systems inventory, RPO/RTO, failover procedures, recovery infrastructure, and post-recovery validation.

IT KORR Knowledge Center

Disaster Recovery Plan Template

A technical DR plan document structure covering systems inventory, RPO/RTO, failover procedures, recovery infrastructure, and post-recovery validation.

Systems Inventory & RPO/RTO

A DR plan is only as good as its systems inventory. Every system that supports a critical business function needs a documented recovery objective — without this, "we'll get it back up as fast as we can" is the only plan, and it is not testable or auditable.

  • List every system supporting a critical business function, including its owner and hosting location (on-prem, cloud, SaaS).
  • Assign a Recovery Point Objective (RPO) per system — the maximum acceptable data loss, expressed as time.
  • Assign a Recovery Time Objective (RTO) per system — the maximum acceptable time to restore the system to operation.
  • Note dependencies between systems (e.g., application server depends on database, depends on network/DNS).

Failover Procedures

  • For each critical system, document the specific, numbered steps to fail over to backup infrastructure or a recovery site.
  • Step 1 — Confirm the outage is real and scoped; rule out a transient or partial issue before initiating failover.
  • Step 2 — Notify the IT Recovery Lead and Crisis Management Team that failover is being initiated for the named system.
  • Step 3 — Execute the documented failover procedure for the system (e.g., promote standby database, redirect DNS/traffic to recovery environment, restore from most recent backup).
  • Step 4 — Confirm the system is reachable and functioning in the recovery environment before declaring it restored.
  • Document the specific tool, script, or console used for each step — generic instructions are not executable under pressure.

Recovery Site & Infrastructure

  • Document the recovery site or infrastructure type per system: hot site, warm site, cold site, or cloud-based failover.
  • Record capacity and configuration of the recovery environment, and confirm it can support production load.
  • List access requirements (credentials, VPN, physical access) needed to reach and operate the recovery environment.
  • Confirm licensing and vendor agreements cover use of the recovery environment during an actual event, not just testing.

Roles During a DR Event

  • IT Recovery Lead — directs execution of failover procedures and confirms system-by-system recovery status.
  • System Owners — execute the specific technical steps for their assigned system and report completion.
  • Communication Lead — relays recovery status to the Crisis Management Team and affected stakeholders.
  • Escalation contact — a named individual (with backup) for each critical vendor whose system is part of recovery.

Communication & Escalation Procedures

  • Define the notification chain: who is contacted first, and the maximum time before escalating to the next contact if unreachable.
  • Maintain a current on-call/escalation list with primary and backup contacts for IT, vendors, and leadership.
  • Set a cadence for status updates during an active DR event (e.g., every 30-60 minutes) and who receives them.

Post-Recovery Validation

  • Verify data integrity — confirm restored data matches the expected recovery point with no corruption.
  • Verify application functionality — run defined smoke tests to confirm the system behaves correctly, not just that it is reachable.
  • Confirm actual recovery time against the target RTO, and actual data loss against the target RPO.
  • Document the event, response timeline, and any deviations from the plan for post-incident review.

Related Resources

  • Disaster Recovery Explained — /knowledge-center/business-continuity/business-continuity-disaster-recovery/disaster-recovery-explained
  • RPO vs. RTO Explained — /knowledge-center/business-continuity/business-continuity-disaster-recovery/rpo-vs-rto-explained

This document is a starting-point resource, not legal or compliance advice. Review it against your organization's actual systems before adoption — see the full Business Continuity & Disaster Recovery Hub for the reasoning behind each recommendation, or browse the full Resource Library.

If you would rather not do this by hand

Testing whether this plan would actually work is a defined engagement.

A written plan and a tested one are different things. Discovery is read-only; restoring anything is a separate step you scope and authorise first.

Or describe what you are trying to protect — the enquiry form opens with “Backup & Recovery” selected, and you can change it.

Business Continuity & Disaster Recovery

Need This Plan Tested Against Your Real Environment?

A documented plan is the starting point — IT KORR can validate backup coverage, run the recovery tests that prove your RTOs are achievable, and maintain the continuity documentation behind them.

No commitment required — a person reads every enquiry and replies directly, or call (848) 200-9669 now.